DimaFIX®: Highly Commended for 3D Printing
Dimafix® is a spray used by 3D printers with FFF technology and HeatedBed.
-
Properties of Dimafix®:
-
TECHNICAL DOCUMENTATION
The purpose of Dimafix® is to make easier and successful the 3d printing process.
The first layers in the printing process will be fixed with a lightly spraying of Dimafix® at the hot HeatedBed in the point where the part will be printing. This action avoids unintended effects or warping. Once the printing process is ending and the HeatedBed’s temperature is under 50ºC the model can be removed without any effort from the bed and no tools, that would damage the part, are required.
Dimafix®is distributed in a spray can with an interior ball which helps to prevent blockages at the nozzle. The capacity of the spray is 400ml, this suppose a long useful life of the product because the lightly spraying is only necessary at the area where the piece will be printing.
Dimafix® is an important advanced in the 3d printing world.
You can find it in the official web of http://www.dimafix.com/